The Z-purlins on the ends of every Sinclair ground mount are sharp and could potentially cause injury if you’re not watching where you’re going. Fit these caps onto the ends of the Z-purlins and it reduces risk of injury if someone were to come in contact with them!

The post End Cap for Sinclair Ground Mount appeared first on Practical Preppers.

Advanced Technology: Our team of experts leverages the latest technological advancements to create solar panels that offer superior performance and reliability.

• High mono efficiency
• Minimize microcracks and free trails
• Improved shading tolerance
• Wind to 2400 Pa
• Snow to 5400 Pa
• Fire resistance up to Class C
• High-Efficiency PERC bifacial cell technology
• Outstanding temperature coefficient
• Certified for salt/ammonia corrosion resistance
• Lower LCOE
• Suitable for harsh environments such as coasts, lakes
• Assembled in the U.S

Technical Specs:

Assembled with 9BB PERC cells in a half-cell configuration, this module offers numerous advantages, including better temperature-dependent performance, reduced shading effects on energy generation, lower risk of hotspots, and enhanced tolerance for mechanical loading.

Experience up to 30% more energy yield due to back-side power generation, resulting in higher output power (this feature for bifacial modules only), lower Levelized Cost of Electricity (LCOE), and less shading with lower resistive loss.

Key specifications:

• Nominal power: 370 Watts
• Number of cells: 120 half-cut
• Power tolerance: 0 / +5 Watts
• Vmp: 34.7 Volts
• Voc: 41.1 Volts
• Imp: 10.68 Amps
• Isc: 11.41 Amps
• Module efficiency: 20.3%
• Dimensions(inches): 69.1″ x 40.94″ x 1.2″
• Dimensions(mm): 1755 x 1040 x 30
• Weight: 44.0 lbs (20 kg)

*Note: You must inspect the order upon delivery for any damages. It is your responsibility to document and notify us of any possible damages upon receipt. After acceptance of your shipment, you have legally released the freight carrier of any liability of damage. Any damages not notated within 24 hours of delivery and do not have a delivery receipt with documentation will be denied.

Manuals and Downloads:

• KB Solar 375W Monofacial Spec Sheet
• KB Solar 375W Bifacial Spec Sheet

The post KB Solar 375W Solar Panel appeared first on Practical Preppers.

Advanced Technology: Our team of experts leverages the latest technological advancements to create solar panels that offer superior performance and reliability.

• High mono efficiency
• Minimize microcracks and free trails
• Improved shading tolerance
• Wind to 2400 Pa
• Snow to 5400 Pa
• Fire resistance up to Class C
• High-Efficiency PERC bifacial cell technology
• Outstanding temperature coefficient
• Certified for salt/ammonia corrosion resistance
• Lower LCOE
• Suitable for harsh environments such as coasts, lakes
• Assembled in the U.S

*Note: You must inspect the order upon delivery for any damages. It is your responsibility to document and notify us of any possible damages upon receipt. After acceptance of your shipment, you have legally released the freight carrier of any liability of damage. Any damages not notated within 24 hours of delivery and do not have a delivery receipt with documentation will be denied.

Technical Specs:

With advanced 12BB PERC cells and a half-cell configuration, this module delivers superior power output, improved temperature-dependent performance, and reduced shading effects. Plus, it offers enhanced tolerance for mechanical loading and a lower risk of hotspots.

Take advantage of up to 30% more energy yield, thanks to the back-side power generation feature (this feature on bifacial modules only), resulting in a higher output power and lower Levelized Cost of Electricity (LCOE). Less shading and lower resistive loss further contribute to the panel’s overall efficiency.

Key specifications:

• Nominal Power: 450 Watts
• Watt Class Sorting: -0/+5
• Vmp: 41.5 Volts
• Imp: 10.85 Amps
• Voc: 49.3 Volts
• Isc: 11.60 Amps
• Panel Efficiency: 20.7%
• Dimensions: 82.44″ x 40.8″ x 1.37″ (35mm)
• Weight: 51.82 lbs.
• Pallet quantity: 27 modules

Manuals and Downloads:

• KB Solar 450W Monofacial Spec Sheet
• KB Solar 450W Bifacial Spec Sheet

The post KB Solar 450W Solar Panel appeared first on Practical Preppers.

Sol-Ark O900-80V offers state-of-the-art PV module rapid shutdown device (RSD) and maximum power point tracking (MPPT) power optimization. O900-80V can attach to every PV module and provide RSD (PV rapid shutdown) required by UL 1741 and NEC 690.12.

It will compensate for shaded panel(s) to maintain peak output power. When installed with and receiving a “permission to operate” signal from the TX 12K-A or TX 15K-A Transmitters, O900-80V starts proper operation of PV system.

By turning off the TX 12K-A or TX 15K-A transmitter, the O900-80V receivers will drop the voltage to 0.9 VDC per O900-80V and the string voltage to less than 30 VDC.

In addition to offering Rapid PV Shutdown (PVRSS), the O900-80V optimizers add power optimization advantages to each PV module making it an independent maximum power point tracker.

Manuals and Downloads

• Sol-Ark Rapid Shutdown Optimizers Spec Sheet
• Sol-Ark Optimization Rapid Shutdown with 12k Integration Manual in English
• Sol-Ark Optimization Rapid Shutdown with 15k Integration Manual in English
• Sol-Ark Optimization Rapid Shutdown with 12k Integration Manual en Español
• Sol-Ark Optimization Rapid Shutdown with 15k Integration Manual en Español

The post Sol-Ark Optimization Rapid Shutdown 0900-80V appeared first on Practical Preppers.

Manuals and Downloads

• Spec Sheet

The post TX-12K-A Inverter Integrated Optimizer appeared first on Practical Preppers.

Manuals and Downloads

• Spec Sheet

The post TX-15K-A Inverter Integrated Optimizer appeared first on Practical Preppers.

• Material: Red Copper (T2)
• Surface treatment: Nickel-plated
• Resistivity [Ω·m]: ≤0.0177
• Tensile strength [N/mm2]: ≥215
• Vickers hardness: ≥55
• Ampacity [A @ 25°C]: 620
• Ampacity [A @ 40°C]: 500
• Compatibility: Sol-Ark 15K

Downloads and Specs:

• Busbar pair for Sol-Ark Inverters Spec Sheet

The post Busbar Pair for Sol-Ark 15k Inverters appeared first on Practical Preppers.

Practical Preppers^® Wiring Template for Sol-Ark Outdoor Case 12k Inverters!

1/8″ Aluminum wiring template for clean, consistent, and accurate drilling when installing Sol-Ark 12k inverters. Just place your template on the surface of your wiring trough where the Sol-Ark will be mounted, mark your drilling holes, and drill for perfectly placed holes to bring your wires through to the inverter.

How to Use:

(Watch from 6:18 – 7:28)

The post Sol-Ark 12k Inverter Wiring Template for Installers appeared first on Practical Preppers.

Practical Preppers^® Wiring Template for Sol-Ark 15k Inverters!

1/8″ Aluminum wiring template for clean, consistent, and accurate drilling when installing Sol-Ark 15k inverters. Just place your template on the surface of your wiring trough where the Sol-Ark will be mounted, mark your drilling holes, and drill for perfectly placed holes to bring your wires through to the inverter.

Click here to view our Sol-Ark 15k Inverter

How to Use:

(Watch from 6:18 – 7:28)

The post Sol-Ark 15k Inverter Wiring Template for Installers appeared first on Practical Preppers.

The SmartLoads-14 ‘smart panel’ is an AI-driven smart load panel that is designed to be used in conjunction with a home’s existing electrical distribution panel providing fourteen (14) 100A circuits.  The SmartLoads-14 can be used as a standalone energy management system providing control over the fourteen circuits while being responsive to the electrical consumption as well as the homeowner’s needs.

When combined with a solar PV system and Sol-Ark hybrid inverters, the SmartLoads-14 can help optimize both overall performance, as well as a system’s ROI (return on investment) while enabling a new level of visibility and control.  Improving overall energy efficiency and reducing peak demand, the SmartLoads-14 maintains cost savings as a priority by intelligently using all available renewable energy assets to maximize savings.

A smartphone app easily allows real-time user-defined circuit prioritization, scheduling and mode automation, control and optimization of energy usage.

Technical Features:

• Fast, efficient, and easy installation
• Redundant power supplies and manual bypass for each circuit
• Grid-tied and off-grid capable
• 4ms transfer time
• Machine learning/AI auto-learning profiles for each circuit
• User-programmable for discrete control of each circuit
• Multiple service voltages
• Scalable solution – can ‘parallel’ up to 15 units
• NEMA 3R outdoor-rated enclosure
• Local monitoring via app for user control

The post Sol-Ark SmartLoads 14 Smart Panel appeared first on Practical Preppers.