As one of the fastest to set up ground-mounted systems in the industry and with the ability to load up to 4 MWp into a truck, the COMPACTGROUND G not only provides the best installation times and transport costs, but also a significant price advantage. These distinctive product features make the system particularly suitable for landfill/brown field projects and all system sizes from 5 kWp up to 5 MWp.

• No need for large machinery
• Short installation times
• Low transport costs
• Several ballasting options
• Wind tunnel tested
• Solar PTL CERTIFIED to UL 2703
• Salt spray tested

Ballast blocks can be placed on the brackets without any fasteners.

In addition to ballasting with ballast blocks, the system can be screwed into various soils with our ground screws, without the use of large machinery, and to withstand high wind loads.

Manuals and Downloads:

• Aerocompact COMPACTGROUNDG Spec Sheet
• Aerocompact COMPACTGROUNDG Assembly Manual

The post COMPACTGROUND G Ground Mount System by Aerocompact appeared first on Practical Preppers.

The Z-purlins on the ends of every Sinclair ground mount are sharp and could potentially cause injury if you’re not watching where you’re going. Fit these caps onto the ends of the Z-purlins and it reduces risk of injury if someone were to come in contact with them!

The post End Cap for Sinclair Ground Mount appeared first on Practical Preppers.

End Clamp for the MiniRail XPRess mounting system for solar modules designed specifically for trapezoidal sheet metal roofs. Coming in small lengths of rail (17 inches) allow maximum flexibility and ease of installation.

Used to clamp solar panels to the MiniRail XPRess mounting rail for rooftop solar arrays.

Technical Features:

DRIVE: Hexagon Socket – 13 mm
MODULE FLANGE THICKNESS [MM]: 1.2 – 2.5 mm
MODULE FLANGE WIDTH [MM]: 15 – 40 mm
SCOPE OF APPLICATION: Flat Roof, Ground Mount, Pitched Roof
COMPONENT TYPE: Module clamp
COMPONENT PRODUCT MATERIAL: Aluminum with stainless steel hardware

Downloads and Literature:

MiniRail XPRess End Clamp Sheet

The post K2 Systems MiniRail XPRess End Clamp appeared first on Practical Preppers.

The MiniRail XPRess mounting system for solar modules is designed specifically for trapezoidal sheet metal roofs. Coming in small lengths of rail (17 inches) allow maximum flexibility and ease of installation.
17-inch sections of rail with EPDM backing to reduce the chance of water intrusion
Comes with K2 Self-tapping stainless screws that also have an EPDM washer to reduce the chance of water intrusion
Can be used on metal sheet roofs as thin as 29 gauge
Add Pre-assembled K2 universal (30-50mm) mid and end clamps with integrated bonding
Integrated bonding eliminates the need for bonding jumpers
UL 2703 Listed for bonding

TECHNICAL DATA
How to Install:

Place MiniRail XPRess Base on trapezoidal roof and screw into the peaks of the roof

MiniRail XPRess Rail: Aluminium, with EPDM

MiniRail XPRess Base Dimensions: (WxH) 73mm x 44.18mm

MiniRail XPRess Base Length: (L) 17in

Downloads and Literature:

• EXPress MiniRail Installation Manual

The post K2 Systems MiniRail XPRess Kit appeared first on Practical Preppers.

Mid Clamp for the MiniRail XPRess mounting system for solar modules designed specifically for trapezoidal sheet metal roofs. Coming in small lengths of rail (17 inches) allow maximum flexibility and ease of installation.

Used to clamp solar panels to the MiniRail XPRess mounting rail for rooftop solar arrays.

Technical Features:

COLOR: Dark
DRIVE: Hexagon Socket – 13 mm
MODULE FRAME HEIGHT [MM]: 30-47 mm
SCOPE OF APPLICATION: Flat Roof, Pitched Roof
COMPONENT TYPE: Module clamp
COMPONENT PRODUCT MATERIAL: Stainless steel

Downloads and Literature:

MiniRail XPRess Mid Clamp Product Sheet

The post K2 Systems MiniRail XPRess Mid Clamp appeared first on Practical Preppers.

Affordable Ground Mount System

• Made in America
• post driven and ballasted
• Please contact us to receive a quote or to order!

Overview: Affordable Ground Mount That’s Easy to Install!

Sinclair ground mounts are an affordable ground mount system that is versatile, easy to install, and a fraction of the cost of competing ground mounts!

The Sky-Rack 2.0 ground mount system introduces an upgraded design to Sinclair ground mounts that increases the structural integrity of the assembly and provides more efficient installation techniques for rapid installations.

• Versatile: This ground mount system offers fixed or season adjustable options (motorized or manual). Higher wind/snow loads options are also available
• Simple: The Sky-Rack 2.0 also makes installations easy with only 4 main components and minimal hardware required. (see brochure below for full details)
• Affordable: Rather than being made with aluminum, Sinclair uses full galvanized steel, producing an affordable ground mount while still remaining strong and reliable!

Sinclair SkyRack 2.0 Features

• Average Lead Time = 5 Business Days
• Only 4 main components used for quick and easy assembly
• Minimal hardware requirements
• UL Certified Grounding Clamps or direct hardware to module
• (2×5 – 10x Panel Portrait Continuous) Rated for 125MPH Wind Load & 60PSF Snow Load
• Additional design features available for requirements over 125MPH & 60PSF.

Sinclair SkyRack 2.0 Options

Sinclair Designs also offers customers unique options for their ground mount systems. Check out each affordable ground mount option below. Contact us for an official quote or to order!

Fixed Tilt Ground Mount System

• • 5-45 Degrees

Season Adjustable Ground Mount System

• • Manual: 15-60 Degrees

Note: Higher wind load/snow load options are available. Formal site specific structural calculations available upon request.

Affordable Ground Mount AND Easy to Install

Only 4x Main Components

1. Z-PURLIN-210 (Slots available for direct to module)
2. 4×9 C-CHANNEL POST (8-18 Feet Available)
3. SLR-TRUSS-105
4. SLR-STRUT-50

Minimal Hardware Required

1. 2x 5/8-11 Serrated Flanged Bolts/Nuts
2. 6x 1/2-13 Serrated Flanged Bolts/Nuts
3. Custom Extrusion Panel Clamp Kits

More Affordable Options From Sinclair!

Sinclair Designs also offers options for affordable solar carports, affordable pole mounts, and affordable ballasted roof mounts. Request a quote for a final price or to order yours today!

Downloads

• Ground Mount Brochure
• Sinclair Sky Rack Fixed Tilt Installation Guide
• Sinclair Sky Rack Season Adjust Installation Manual

The post Sinclair Sky-Rack 2.0 – Affordable Ground Mount System appeared first on Practical Preppers.

They are made of powder coated steel with aluminum rails and clips.

IMPORTANT
• Mounting pole not supplied with rack

CAUTION
• It is the installers responsibility to follow all local, regional and national building codes.
• Always call 811 before digging to have all buried cable, water lines and gas lines marked.
• Do NOT install solar array near equipment or in places where flammable gases may be generated.

THE “RULE OF THUMB” GUIDLINES FOR MOUNTING POLE INSTALLATIONS
• It is the installers responsibility to verify all soil conditions.
• Soil conditions vary from region to region
• Soil conditions will determine the actual depth and diameter of the hole and concrete used.

• Sun-Rac Manual

The post GenPro Sun-Rac Pole Mounting System appeared first on Practical Preppers.